1. Printing plan
The printing plan is aimed at the theme of the matching design. For the printing method, the size of the layout, the subject matter of the printed matter, the color number of the paper or printing, and even the relevant processing manufacturer, it is necessary to carefully and specifically review the production process. Go online and complete the finished product.
2. Design and production (schedule)
According to the printing plan, copywriting, design, layout planning, etc., is the pre-operational procedure for the finished draft, and also arranges the drawing of photographs and illustrations, and contacts the manufacturers to coordinate the scheduling between the productions to make various elements. Concrete.
3. Finished production (electronic finalization)
According to the first draft of the layout plan, the copy, photo and illustration, correct position and correct color mark, etc., are arranged on the finished paper or the manuscript is processed electronically, and the special requirements for the plate making are clearly indicated. Special requirements instructions, this is the pre-work of the plate making.
4. Production output and plate making operations
After the finished draft is finished, the picture is scanned by electronic color separation machine. The text and lines are taken by black and white camera, the correct number of nets (printing dots) are punched out, and the texts, illustrations, etc. are imprinted according to the instructions on the finished manuscript. Perform a printing job, then print out the color proof and send it back to the designer for proofreading. If the electronic final processing is required, the output center output negative film must be submitted. It is necessary to fill in the mountain work order or instruction sheet, clearly indicate the number of lines to be output, and the number of colors, monochrome pages, and whether there are any words and specifications. To avoid communication errors and cause unnecessary damage.
5. Proofreading (checking)
This is the last step before printing. It is to check whether the color proofing conforms to the procedure indicated on the finished manuscript. When color correction and other corrections are made, be sure to use a red pen to write a specific easy-to-understand text description or position outline. Correctly communicate to the people who make the plate to avoid unnecessary losses.
6. Printing operations
The modified four-color mesh was transferred to a printing plate and sent to a printing machine, and the printing was started. If you want to get the ideal printed product on the printing press, you must first understand the printing factors. Because there are many variables that have a great impact on the printing quality, you must have a certain and sufficient understanding of these factors.
7. Binding and processing operations
Publicity (public relations) manuals, catalogues, brochures, etc., commonly known as DM, the last formality of printed matter, is the binding processing, the most commonly used flat-panel type is cutting, pressing, folding, etc. As for binding, it is based on The number of pages, the type of paper, the degree of exquisiteness, the way of use and the purpose.