新闻中心-
[2019-05-05] How to reduce printing stains by removing static electricity
Label materials are very sensitive to static buildup. The accumulated electrostatic image is a magnet that attracts contaminants around the surface of the material. These contaminants can come from packaging, clothing fibers, hair, cut dust, ink, m... -
[2019-04-20] Talking about the Five Tips of Adding Light and Shadow Effect to Printing and Packaging Design
Prepress design plays a huge role in the entire printing and packaging process. Here are some tips for adding light and shadow to your design. Use a light source It should be said that understanding the source of light when using light is the mos... -
[2019-04-05] Analysis on the installation, debugging and correct use of printing rubber rollers
Whether you are using a letterpress, gravure, flexo or offset press, you are faced with the problem of how to install and commission the rollers. If you can not reasonably use and follow its operating rules, not only can not print the ideal and exc... -
[2019-03-20] Standard process for post-printing folding operations
(1) Determine the correct folding method of the paper on the machine. Please fold the folding sheet in the order of page number to open the folding sheet. In general, take one-half of the width of the paper (the upper and lower sides of the paper a... -
[2019-03-05] How to avoid the generation of wire during the plastic printing processHigh-end selection of label printing
Flexo printing - for front printing, reverse printing and back printing depending on the needs of the business. Gravure technology - very mature technology, low cost, and promoted use. Screen printing - speed is limited by the ability to dr...
